Izdelki za olje in (194)

Das Öl wurde speziell für den Einsatz unter härtesten Bedingungen an Hochleistungssägen von Harvester-Holzerntemaschinen, auch unter extrem winterlichen Bedingungen, entwickelt.

Durch den Einsatz spezieller Additive besitzt Medialub GLP 68/GLP 220 geringe Haftreibwerte und somit ein konstantes Gleitverhalten ohne Stick-Slip Erscheinungen auch bei Feinvorschüben

Suitable for for any waterproof, oiled or waxed surfaces, like floors, wall and ceiling cladding, furniture, countertops, doors, etc. Bio Floor Care Cream cleans and nurtures sensitive softwood and hardwood surfaces indoors. Also suitable for initial treatment.

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):100 mm²/s

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):220 mm²/s FZG damage level:power level > 12

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-45 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):32 mm²/s

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s

Suitable for any impregnated, especially pressure treated, garden wood and garden furniture, like fences, carports, pergolas, plant troughs and sandboxes. Bio Wood Care Oil prevents graying of impregnated wood, refreshes color and protects and nurtures treated wood.

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Suitable for protection and Preservation of terraces and other wood in garden areas like trail markers, fences, privacy screens and facade cladding made from douglas fir, larch, hardwood and exotic wood. Douglas Fir Deck Oil produces a highly water-repellent, weather and UV-resistant, durable surface which offers long-term protection against graying.

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):2,000 mm²/s

Suitable for priming any wood indoors and outdoors. Highly water-repellent, open-pore, deep penetrating impregnation primer for highly strained surfaces like furniture, work tops, wooden decks in damp areas, wood and cork floors and for curing of surfaces and lead-free drying agents.

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):320 mm²/s FZG damage level:power level > 12

Suitable for use as first or refurbishment coat for any wood outdoors such as windows, window sills, garden houses, facade claddings, timber framing, doors, fences, balconies and garden furniture. Wood Oil Varnish Plus is a transparent, water-repellent, open-pore and UV-resistant coat for outdoors. The varnish offers excellent, preservative protection against weather damages. Our product is nearly odorless and easy to use. It penetrates well and it is effective against organisms like algae or fungi due to the pearling effect.

Ölfarben auf Leinwand gemalt, Ein Ölgemälde von Irene Magdalena Orecher. Undurchdringlicher, geheimnisvoller Dschungel aus Bambus zeigt seine Schönheit und Widerstandsfähigkeit. 60 x 50 cm, 2012 60 cm hoch:50 cm breit Ölgemälde:Realismus Galerie Momeart:Peißenberg

Suitable for any parquet or wooden surfaces indoors. Especially blond wood like maple retain their evenly blond, beautiful surface after treatment with High Solid Oil Wax. High Solid Oil Wax is made from select, high quality natural waxes and natural oils.

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):50 mm²/s

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-25 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):680 mm²/s FZG damage level:power level > 12

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences MOSH/MOAH-free NSF H1-registered Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):1,000 mm²/s

Graphitex 208 RS - Graphite-containing forging oil as a substitute for forging pastes

NIVEA Soap Lemongrass & Oil is a refreshing and invigorating soap that combines the benefits of lemongrass and oil to provide a luxurious bathing experience. Lemongrass, known for its citrusy and uplifting scent, helps to cleanse and purify the skin while leaving a refreshing fragrance. The addition of oil in this soap helps to moisturize and nourish the skin, leaving it feeling soft and supple. This soap is suitable for all skin types and can be used daily to cleanse and revitalize the body. The NIVEA brand is well-known for its high-quality skincare products, and this soap is no exception, providing a gentle yet effective cleansing experience.

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Operating temperature:-50 °C → +100 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):17.5 mm²/s

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1-registered MOSH/MOAH free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Suitable for domestic and exotic hardwood outdoors (bangkirai, garapa, teak, mahogany, meranti, nyatoh, roble, jarrah, bilinga, robinia, oak thermowood). Ideal for wooden decks and garden furniture.Thanks to its special formulation Bio Hardwood Deck Oil offers long-term protection against UV-rays and weather damages. Bio Hardwood Deck Oil is non-abrasive, free of toxic agents and odorless when dry.

Suitable for any impregnated, especially pressure treated, garden wood and garden furniture, like fences, carports, pergolas, plant troughs, sand boxes. Garden Wood Care Oil prevents graying of impregnated wood, restores color and protects and preserves the treated wood.

Suitable for use as first or refurbishment coat for any wood outdoors such as windows, window sills, garden houses, facade cladding, timber framing, doors, fences, balconies and garden furniture. Wood Oil Varnish is a transparent, drop reduced, open-pore and UV resistant wood preservative. Our product is nearly odorless, easy to use and penetrates well.

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 46 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):50 mm²/s

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences NSF H1-registered Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):350 mm²/s

Lubrication of chains, joints, clamping and drying frames or slideways at temperatures up to 280°C For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Reduction of the friction coefficients and increase in the wear protection through additives suitable for high temperatures Long period of use through high oxidation stability Clean chains without deposits (no cracking residues) Extended relubrication intervals through low evaporation losses Operating temperature:-10 °C → +280 °C Density (20 °C):0.97 g/ml Viscosity (40 °C):150 mm²/s